• Always ensure flag when hoisted on a flag pole cannot flap against another object, like corner of house, roof, support wire etc.

• To extend flag life, take flag down at dusk each day, and re-hoist the next morning.

• When you expect storms or high winds always remove flag from flag pole and store.

• Choose the flag material carefully to suit your flag usage and flag flying plans.

• The flags made of flag bunting material are more suited to areas where high or consistent winds are experienced.

• Flags made of Trilobal material because of their light weight will generally fly better where breezes are very consistently light.

FOLDING THE FLAG

Step 1

Begin by holding it waist-high with another person so that its surface is parallel to the ground.

Step 2

Fold the lower half of the stripe section lengthwise over the field of stars, holding the bottom and top edges securely.

Step 3

Fold the flag again lengthwise with the blue field on the outside.

Step 4

Make a triangular fold by bringing the striped corner of the folded edge to meet the open (top) edge of the flag.

Step 5

Turn the outer (end) point inward, parallel to the open edge, to form a second triangle.

Step 6

The triangular folding is continued until the entire length of the flag is folded in this manner.

Step 7

When the flag is completely folded, only a triangular blue field of stars should be visible.

RELATED PRODUCTS
Vinyl Flag case - $10.00	Wooden Flag Cases